Is it possible to make swirl patterns on glass tabletop with a wire wheel attached to drill?
Suggestion welcome ?
I would probably try glass etching cream and "etch" the underside of the table.
I agree with Pixie. I think the wire wheel would damage the table top. Scratching and possibly chipping the glass.
My thoughts, too...do the underside of the table & use 'etching' process.
You can buy spray in a can to make glass look frosted. Just another idea :)
To get actual swirls you could try a rotary sander with a fine grit paper, and test it on sample pieces of glass first to see if you get the look you desire.