Electrolux M3540PD Mower

rrstorerMarch 17, 2013

Hi,

Thanks for reading this post. I bought this mower on ebay. I'm trying to find out whether it needs oil or not. The mower didn't come with an instruction manual. I have found one:

http://diplo-best.com/314.php?k=18b37c6ba959b84ff3c17770e917aa44&ID=933304&q=MCCULLOCH%20M3540PD

however it doesn't make any reference to oil. I added a little unleaded earlier and started it successfully. However I stopped quickly as I don't want to damage the engine.

Does anyone have the full manual and know where to add the oil or do I mix it in with the unleaded at a certain ratio?

Thanks in advance

Rob

Thank you for reporting this comment. Undo
bill_kapaun

Unlikely you mix the gas & oil, however it "appears" you are on the "other" side of the pond.
Maybe they still sell 2 stroke engines there?

It boils down to WHAT engine you have.
Your "manual" lists an oil filler cap & drain plug on page 3.
That would mean it's a 4 stroke and you DON'T mix gas & oil.

See if the fill cap has a dip stick attached to it. If so, it should have min/max marks.

Which engine is it? Briggs or??????

    Bookmark   March 17, 2013 at 3:19PM
Sign Up to comment
More Discussions
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
radlee30458
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
snapperfreak
snow throwing
older blower. 7hp, 24" width, 14" auger....
joe_mn
Briggs and Stratton spark plug confusion
I've got a B & S opposed twin 422707 on a Craftsman...
yt125
John Deere L110
The mower has been sitting for 3 years, it ran when...
paddlingjohn
© 2015 Houzz Inc. Houzz® The new way to design your home™