Question regarding blade removal on TORO, model 20057.

rredogg(5/Chicago Area)March 10, 2013

Plan on changing out the blade. To remove the bolt do you go counter-clockwise or does the bolt have reverse threads?

Thanks in advance, rredogg

Thank you for reporting this comment. Undo

Normal RH threads - left to loosen. Turn the mower up on it's side with the carburetor side high, oil drain low. Disconnect and ground out the spark plug connector wire. Turn the blade straight up and down. Put a piece of 2x4 on the leading edge of the lower blade end and stand on it. Put your wrench or ratchet on the bolt head with the handle to the left so you can use your weight on it. It should loosen.

    Bookmark   March 10, 2013 at 4:32PM
Sign Up to comment
More Discussions
21" self-propelled, which has most reliable drive system?
Hi there, I'm looking to replace my Ariens Classic...
Ariens Zoom 2350 zero turn won't start
Model # 915085 with Kohler 23HP engine. Ran fine all...
Need Recommendations For Inexpensive Gas Push Mower With Mulch Bag
I think it's time to retire our old mower, which is...
Hayter Harrier Pro Roller Problems
Hi folks, I have just taken apart my hayter harrier...
Honda Mower Problem-Backfire thru Carb?
I have a Honda walk behind that has been awsome until...
Sponsored Products
Chappelle 4 Light LED Rail Kit by AFX Lighting
$259.99 | Lumens
Frasier Leather Sleeper Sofa - Brighton Lemon Grass Yellow
Joybird Furniture
Lighted Party Sign
$249.00 | FRONTGATE
Modern Fan Company | Velo Ceiling Fan
$384.00 | YLighting
San Francisco Giants Garden Flag
$8.99 | zulily
Abetta Endurance Wide Flex with Aire Grip - 20510FWC6BK
$386.75 | Hayneedle
Pro Track 300 Watt Bronze Six Light Wave Bar
Lamps Plus
Peanut Butter Splurge - DARK CHOCOLATE
$36.00 | Horchow
© 2015 Houzz Inc. Houzz® The new way to design your home™