Lawnmover Wire Split into 2 Pieces!

shammyyApril 21, 2010

Ok so the other day I was cutting my lawn and as the grass is so big, I went over the wire by accident and now my wires are in two peices. Inside the wire is 2 wires that when I connect together and tape up there is still no sign of it working. I tried the fuse and replaced it but still no signal of life. Anyone can show me a tutorial on how to put the wire back together again?.. One is a blue wire and one is a brown wire. I connect them directly to whatever colours they are, blue 2 blue and brown 2 brown but still no luck. Also I twist them together so they do not split up and then tape each one up individually!.. Anyone able to help please?


Thank you for reporting this comment. Undo

I assume that you are running a corded electric mower. Did you check to see if you tripped the breaker to the outlet that you are plugging it into?

    Bookmark   April 21, 2010 at 1:00PM
Sign Up to comment
More Discussions
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
john deere RX75 belt diagram
I have a Rx75 with 9hp motor. I bought it used and...
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
John Deere L110
The mower has been sitting for 3 years, it ran when...
Advice Needed on a Used Mclane Reel Mower
Hello! I live in Southern California (San Fernando...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™