Snapper Self Propelled Mower

Poohbear6982April 15, 2014

I have a Snapper self propelled lawn mower, Model P21500. The drive disc (the one with the rubber band) will not stay in position. As soon as I engage the self propelled function, the drive disc moves all the across the drive pulley (the one driven by the engine). I cannot figure out what is happening.

Has anyone ever seen this problem and have any suggestions?

Thanks

Thank you for reporting this comment. Undo
hippy

Have you check the Spring tension on the Wheel Drive & Idler (disc)?

    Bookmark   April 15, 2014 at 1:42PM
Thank you for reporting this comment. Undo
Poohbear6982

Hippy,
I took everything apart yesterday and put it back. Everything seems correct except for the original problem. I cannot figure this out. Guess it may be time to go the repair professionals.

Thanks for the help.

    Bookmark   April 18, 2014 at 4:40PM
Thank you for reporting this comment. Undo
baymee(LehighValleyPA)

I don't have any pictures at this moment, but I believe you didn't hook up one of your linkages.

    Bookmark   April 18, 2014 at 5:29PM
Thank you for reporting this comment. Undo
andyb1

do you have the rod that connects the speed control lever to the wheel lever ,there is a small clip that must be clipped to the connecting rod or the disc will not stay in place.

    Bookmark   April 24, 2014 at 6:31AM
Sign Up to comment
More Discussions
Gas leak in Toro CCR 3650 Snowthrower
Hello all, I know this is a lawn mower forum, however...
jlaak5
Shindaiwa T18 Trimmer TK Carb Rebuild
During the process of cleaning and replacing the diagphrams...
sjsmithjr
John Deere 14SB Transmission
Greetings! I have a John Deere 14SB self-propelled...
greenhand
Troy Bilt Snow Blower
I have a Troy-Bilk 21", 4 cycle, 123cc ohv engine....
redrabbit
Troy Bilt 21inch Push Mower w/B&S Engine
I have an 11A-426A711. I prime it and it starts and...
gordini39
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™