BlackMax parts

juanscottApril 3, 2010

Does anyone know how to get parts? I bought a walk-behind mower from Sam's and I can't find a dealer that can get the proper wheel replacement.

Thank you for reporting this comment. Undo
tomplum

What's the model #?

    Bookmark   April 3, 2010 at 4:19PM
Thank you for reporting this comment. Undo
juanscott

It's a GVC 160.

    Bookmark   April 4, 2010 at 5:30PM
Thank you for reporting this comment. Undo
canguy(British Columbia)

That is the engine number, Tom is asking for the one off the deck.

    Bookmark   April 4, 2010 at 5:52PM
Thank you for reporting this comment. Undo
juanscott

There are two numbers:
961440002 01
SM2155SP

    Bookmark   April 5, 2010 at 10:21AM
Thank you for reporting this comment. Undo
tomplum

151162 rear wheel 180769 front
Any dealer that get parts for Sears mowers can get this part as it is built by EHP. Searspartsdirect.com also.

Here is a link that might be useful: IPL

    Bookmark   April 5, 2010 at 11:18AM
Thank you for reporting this comment. Undo
juanscott

I'll give that a try. Thanks for the tip.

    Bookmark   April 5, 2010 at 5:40PM
Thank you for reporting this comment. Undo
flashfox_gmail_com

Any info for the Black Max model 961440005 00 lawn mower offered by Sam's Club?

I went to Black Max' website and they don't seem to offer lawnmowers.

    Bookmark   April 24, 2010 at 3:41PM
Thank you for reporting this comment. Undo
leeleebs9

Front wheels are locked up on my Blackmax 961440005. What to do. It's clean & lubed. Thanx

    Bookmark   March 30, 2012 at 4:28PM
Thank you for reporting this comment. Undo
Jimbo57

I had the same thing happen, found out my axle rusted up. just remove the wheel nut and pull the wheel off after soaking the axle in penetrating oil, then use a high grit sand paper (i used one of those sponges) and buff the axle, do the same with the inside of the wheel by taking a drill bit that is smaller than the diameter of the wheel hole and wrap it with high grit sand paper. then grease the axle and replace the wheel.

works like new.

    Bookmark   April 21, 2013 at 12:21PM
Sign Up to comment
More Discussions
John Deere K-Series 12 HP 48.comm walk behind transmission? Old Yellow
I noticed it felt like transmission was slipping in...
Gary Simmons
Lawnboy circa 1967 aquanaut/air buoy evinrude parts
Hi. I am wondering if anyone could be of assistance....
sirlancair
Kohler Knowledge
I am replacing my 2nd B&S 23HP engine on a Simplicity...
wekjo
Looking to replace the LB
I've been using a 2003 Lawnboy 10323 for over a decade...
pacochu
21" self-propelled, which has most reliable drive system?
Hi there, I'm looking to replace my Ariens Classic...
kwk1
© 2015 Houzz Inc. Houzz® The new way to design your home™