Help with broken spark plug wire on Toro 20684

chesapeakebeachApril 19, 2010

I'm working on a Toro 20684 from around 1988 that I snagged from someone as a give-away. In the process of diagnosing it, I discovered that the part of the spark plug wire that attaches to the end of the plug (i.e. the part under the boot) is broken. The wire itself from the ignition seems to be fine.

Any suggestions on how to attach the wire to the end of the plug? A replacement part including the ignition module is $162 and that's a bit much for a 22 year old mower, aluminum deck or not.

Thanks for any ideas!

Thank you for reporting this comment. Undo
canguy(British Columbia)

Most small engine shops carry either a screw on terminal or a crimp on type. The latter has a boot that slips over the terminal. A couple of bucks should get you back in business.

    Bookmark   April 19, 2010 at 11:34PM
Thank you for reporting this comment. Undo
chesapeakebeach

Thanks, canguy -- got the crimp on kind at the local mower shop, mashed it on with pliers, and the mower started on the first pull.

    Bookmark   April 20, 2010 at 1:35PM
Sign Up to comment
More Discussions
Champion Spark Plug lack of quality
Picked up a set of RJ12C's to have on hand when I do...
yt125
John Deere L110
The mower has been sitting for 3 years, it ran when...
paddlingjohn
Advice Needed on a Used Mclane Reel Mower
Hello! I live in Southern California (San Fernando...
hbcsc153
Bad ignition coil magneto on Tecumseh
Is there a more economical solution to replacing a...
don_v
New Honda HRX Drive System
I see where Honda is presenting a new drive system...
skipmarr
© 2015 Houzz Inc. Houzz® The new way to design your home™