Toro Recycler Blade Question

pretzel_logic(Z5 Chicago)April 6, 2010

I bought a 20331 Recycler last summer and love the mower, starts with one pull, the self propel is awesome... I'm wondering if there is a better blade I can use on this. I don't have a problem with grass clippings for the most part but usually end up with a short line of clippings going through some taller sections in the yard. Leaves are another story, they always leave a thick line, even when going though just a few leaves. I usually don't bag unless I want clippings for the garden, or when mowing over lots of leaves.


Thank you for reporting this comment. Undo

i have the 20332 and get a lot of clippings come up around the front right wheel....

you may be cutting too low, or letting it grow too high between cuts

you may also have a dull blade

    Bookmark   April 6, 2010 at 8:32PM
Thank you for reporting this comment. Undo
indy452(NC Kansas)

All my Toro recyclers do this. Its caused from the mulching action and the only way to stop it is to raise the deck height and mow more often..

    Bookmark   April 6, 2010 at 10:25PM
Thank you for reporting this comment. Undo

If the mower is leaving a trail of clippings on one side of the mower mow in a circle or rectangle shape and keep the side that leaves the trails of clippings on the inside. If you mow back and forth the side that leaves the clippings will be an issue on every other pass

    Bookmark   April 6, 2010 at 10:36PM
Sign Up to comment
More Discussions
B&S OHV 6.5 won't start
If I prime the engine 5/6 times it starts on the second...
Came home with a new mower
After I threw in the towel on my LB 10323, I decided...
JD L100 and LA100 series trans oil change
I have a JD L118. It had a K46 trans that failed at...
Need Craftsman mower grass bag
I have a very old, but really good condition Craftsman...
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™