Mower blade adapter key

silvermouseApril 8, 2010

I failed to put the hardened washer and lock washer on when I replaced the blade on my sp mower. The blade adapter broke (big chunk around the key) and I finally found a replacement adapter. The key is the circle sector type and I need to know if the flat part goes into the motor shaft keyway or into the blade adapter keyway. I have new washers and will never forget to put them on again. Thanks for your help.

Thank you for reporting this comment. Undo
canguy(British Columbia)

Depends on the type of key way in the shaft. If it is short and semi circle the key will only go in one way. If it is a square slot use a straight key rather than the woodruff.

    Bookmark   April 8, 2010 at 8:26PM
Sign Up to comment
More Discussions
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
snapperfreak
Snapper 21 BBC Rehab complete! see pics
Guys, Finally after much effort I finished the Snapper...
quickrick
Honda HRX217
Had it for 10 years and is the best mower I ever had....
bob3d
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Nutty1269
need a mower
Hi. I'm trying to find a decent self propelled walk...
mjgarden1
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™