Blade holders need replacing on old IH deck

andyma_gwApril 26, 2010

Are these fairly universal? NOS for this beast is 'spensive. It is a 36 " deck with 2 blades. I noticed that it was cracked . I caged the cracked hub with a strip of sheet metal pop riveted to The diecast aluminum hub. This lasted ok until last season. I think the shaft is a 5/8 with a 3/16 keyway. I'm just looking for info. I havent bothered to up end the mower yet. I have to remove the battery first and that is a pain.

The holder has 5/16 holes that the blade is through bolted to.

I wish the guy down the street was still in business.

Every body wants a yr and model #. It is a 77 IH Cadet 80, a sitdown mower copy cat of the Cub Cadet. Any insights are appreciated. TIA

Thank you for reporting this comment. Undo
ccecilm(6)

Take a look at this group:
http://groups.xxxxx.com/group/ihccubcadettractors/

Replace the xxxxx with yahoo

    Bookmark   April 27, 2010 at 7:41AM
Sign Up to comment
More Discussions
John Deere L110
The mower has been sitting for 3 years, it ran when...
paddlingjohn
Craftsman Lawn Mower Model#917258860 won't turn left
I just bought a Craftsman Lawn Mower with a 46"...
russph3
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Nutty1269
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
radlee30458
Need Craftsman mower grass bag
I have a very old, but really good condition Craftsman...
olddaddy
© 2015 Houzz Inc. Houzz® The new way to design your home™