New Tires Needed - Toro MX5060

vaaccess(Virginia)April 6, 2014

I have about 3-4 acres of land (rest of the 10 acres is wooded) that I am using my Toro TimeCutter MX5060 on. Overall, it's a great piece of equipment.

However, I keep getting it stuck down near our pond since the ground is very soft and/or slightly wet. I want to upgrade to more aggressive tires, how easy is that to do and where do I get them?

Our grassy areas are not kept as fancy lawns, so I have little concern or need to have turf tires. It came with ProTech tires. Anyone have a recommendation on another tire to consider?

Thank you for reporting this comment. Undo
hippy

20"x10" Kenda Scorpion

    Bookmark   April 7, 2014 at 5:55PM
Sign Up to comment
More Discussions
john deere RX75 belt diagram
I have a Rx75 with 9hp motor. I bought it used and...
jeremy_2010
B&S OHV 6.5 won't start
If I prime the engine 5/6 times it starts on the second...
mvron
Champion Spark Plug lack of quality
Picked up a set of RJ12C's to have on hand when I do...
yt125
Engine trouble! B&S 13.5hp
My old Heritage ride-on has a Briggs& Stratton...
Over_here
snow throwing
older blower. 7hp, 24" width, 14" auger....
joe_mn
© 2015 Houzz Inc. Houzz® The new way to design your home™