Bad vibrations man

cheeseheadjoeMay 15, 2013

Ok so I just replaced my blades on my DYS4500 Craftsmen with a 46" deck. And after making sure I had the bolts nice and tight I went out to mow. Then the deck started vibrating like crazy once I engaged the blades. They are brand spanking new blades and I even checked the balance before installing. So what could be the problem here?

Thank you for reporting this comment. Undo
baymee(LehighValleyPA)

Craftsman uses a multi-faceted arbor to secure the blade. I've seen alot of blades that weren't put back on the arbor correctly. Look at the center of the blade for the pattern and the arbor for the matching pattern.

    Bookmark   May 15, 2013 at 2:50PM
Thank you for reporting this comment. Undo
ericwi

Something is not seated or assembled correctly. You will have to take your time and correct the problem, or you could end up with shrapnel in your leg.

    Bookmark   May 15, 2013 at 11:01PM
Sign Up to comment
More Discussions
New Honda HRX Drive System
I see where Honda is presenting a new drive system...
skipmarr
Engine trouble! B&S 13.5hp
My old Heritage ride-on has a Briggs& Stratton...
Over_here
New Purchase
Well hard to believe that it took over 25 yrs to breakdown...
ewalk
Came home with a new mower
After I threw in the towel on my LB 10323, I decided...
pacochu
Reel Mower for Bermuda Lawn?
I was looking at the Fiskars StaySharp Max Reel Mower...
void.pointer
© 2015 Houzz Inc. Houzz® The new way to design your home™