Pressure Washer Engine B&S 4.5-hp Shaking on Lawnmower

rolmMay 3, 2012

I removed an engine from pressure and mounted it on lawnmower I also used new blade adapter and blade. Problem is the dam engine shakes if it had a bent shaft. Could the cast iron flywheel on this engine causing this shaking.

Thank you for reporting this comment. Undo
wayne440

IMHO not likely. Check the blade and adapter for balance and tracking. "New" does not always mean good.

    Bookmark   May 3, 2012 at 10:11PM
Sign Up to comment
More Discussions
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
snapperfreak
Snapper 21 BBC Rehab complete! see pics
Guys, Finally after much effort I finished the Snapper...
quickrick
Mclane 20" mower at Sears... why so inexpensive?
Hey everyone, I want to get yall's input on a mower...
bobbarker14
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Nutty1269
Tru-cut Reel Clutch Adjustment
I've owned this guy since new (1979). Beyond normal...
runner70
© 2015 Houzz Inc. Houzz® The new way to design your home™