Honda Harmony II lawnmower belt

rtruscott7378May 1, 2011

Hello, I have a Honda Harmony II lawnmower purch 9/8/98

Model HRT216SDA ser# MZCG-6042843JF eng # GJAE-1198254MY1

The problem is the drive belt keeps popping off when I engage the drive wheels. I have changed the belt with a Honda original part many times, I have tried adjusting the tension tighter and looser, and still the same results. It seems to happen more when the grass is long or damp but not always. Any suggestions? This is very frustrating!

Thank you for reporting this comment. Undo

When you are able to engage the drive does the engine seem to be laboring or pulling too much? You could pop a belt if something is hanging and pulling the engine down.

Assuming the belt is at the proper tension I would look for something out of line or bent.

    Bookmark   May 5, 2011 at 9:33PM
Sign Up to comment
More Discussions
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
Engine trouble! B&S 13.5hp
My old Heritage ride-on has a Briggs& Stratton...
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
New Toro Push Mower?
I am looking to replace an 11 year old Toro Recycler,...
© 2015 Houzz Inc. Houzz® The new way to design your home™