dow corning #709 sealant

red_hazard(6a)May 17, 2010

To seal the two halves of the gear casing on my powered walk behind mowever, I keep seeing references to Dow Corning #709 sealant. However, I googled and cannot find it anywhere. Was it replaced by something newer? Thanks

Thank you for reporting this comment. Undo
1saxman

You can use the Permatex RTV sealant available at NAPA and other places.

Here is a link that might be useful: Permatex 'Gasket Maker'

    Bookmark   May 18, 2010 at 9:22AM
Thank you for reporting this comment. Undo
red_hazard(6a)

Thanks. I'll give that a try.

    Bookmark   May 20, 2010 at 10:30AM
Sign Up to comment
More Discussions
Sears 6.75 B&S 21" push mower
My 6.75 B&S engine is surging all the time I'm...
gramontj
Ariens Zoom 2350 zero turn won't start
Model # 915085 with Kohler 23HP engine. Ran fine all...
acralph
Need Recommendations For Inexpensive Gas Push Mower With Mulch Bag
I think it's time to retire our old mower, which is...
mimipadv
Lawn Boy 7263 parts to a good home
I have a vintage LB 7263, D 600 engine, Magnesium deck...
bill7263
Two-cycle Lawnmower for Hills?
My lawn was hilly before, but recently became more...
fritz1255
Sponsored Products
Orvieto Mosaic Patio Dining Set - Seats 6 - 21-1321
Hayneedle
Corn Husk Basket Set
$59.99 | zulily
Polished Chrome Three-Light Bath Light
$380.00 | Bellacor
Thermocast Kitchen Rochester Drop-in Acrylic 25x22x9 1-Hole Single Bowl Kitchen
Home Depot
Rooster Basket
$24.99 | zulily
Remer by Nameeks L15US Wall Mount Bathroom Faucet - REMER L15US
$286.00 | Hayneedle
E27 16W 3360LM 84LED SMD 5730 LED Corn Bulb
ParrotUncle
Thermocast Kitchen Breckenridge Drop-in Acrylic 33x22x9 5-Hole Double Bowl
Home Depot
© 2015 Houzz Inc. Houzz® The new way to design your home™