Part Needed

vabearJune 28, 2014

I need the float bowl screw (holds bowl to Carburetor) on a Troy Built TB 260 self propelled with a B&S 725EX engine at 190 CC )12000 Series),. Can anyone help?

Thank you for reporting this comment. Undo

I'd go to the Briggs website and download the IPL for your specific engine to get the correct Part#.
Then, Google or your local OPE dealer?

    Bookmark   June 28, 2014 at 12:12PM
Thank you for reporting this comment. Undo

Using coat hanger technology I was able to get the bolt (actually primary Jet) out from where it lodged itself in engine cooling fins, rebuilt Carb and all is well.

    Bookmark   June 29, 2014 at 9:00AM
Sign Up to comment
More Discussions
Toro Zero turn
Having trouble with Toro Time cutter ZT4200,Koehler...
Amy Bebensee
21" self-propelled, which has most reliable drive system?
Hi there, I'm looking to replace my Ariens Classic...
Ariens Zoom 2350 zero turn won't start
Model # 915085 with Kohler 23HP engine. Ran fine all...
airens 1534 mini zoom no crank
I've got a 15hp Briggs motor that I attempted to jump...
Toro 22" Recycler can't get it started! Please help!
Hi Everyone, So I inherited a 6 month old Toro 22"...
Sponsored Products
Blue 5050 LED Strip Light 60/m 10mm wide 5m Reel
Lush Decor Venetian 4-Piece White Comforter Set
Hint Of Chanel Gallery-Wrapped Canvas
$99.99 | zulily
Maria Theresa Chrome Nineteen-Light 32-Inch Chandelier with Royal Cut Golden Tea
Alvin CraftMaster III Adjustable Drafting Table - CM50-3-WBR
$205.40 | Hayneedle
Worthy Bench - Cordova Picante Orange
Joybird Furniture
Westbury Copper Circles Shade Brass Swing Arm Floor Lamp
Lamps Plus
New Hand Knotted Wool Heriz Rust/Navy Blue Border 3'x5' Oriental Area Rug H5258
BH Sun Inc
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™