push mower wont start after new crankshaft, spark fine..

rstregooskiJune 29, 2010

Hello all.. I recently replaced the crankshaft + key on a 5 year old briggs engine from my push mower. Granted it was the first time I've done a crankshaft, but I did all the research and put everything back together exactly. Now I can't get it to start- sparks fine, carburetor / tank clean, clean gas, oil level check. The flywheel engages the shaft fine, but no combustion. I'm pretty stumped on this one, it's probably something real obvious! If anyone has any ideas I'd be very grateful, thanks a lot..

Thank you for reporting this comment. Undo
roadbike

Are you getting gas through the carb? If so, recheck the valve timing.

    Bookmark   June 29, 2010 at 7:33PM
Sign Up to comment
More Discussions
Engine trouble! B&S 13.5hp
My old Heritage ride-on has a Briggs& Stratton...
Over_here
JD L100 and LA100 series trans oil change
I have a JD L118. It had a K46 trans that failed at...
fix_it
Need Craftsman mower grass bag
I have a very old, but really good condition Craftsman...
olddaddy
snow throwing
older blower. 7hp, 24" width, 14" auger....
joe_mn
Reel Mower for Bermuda Lawn?
I was looking at the Fiskars StaySharp Max Reel Mower...
void.pointer
© 2015 Houzz Inc. Houzz® The new way to design your home™