Tru Cut

tomg(NC)July 16, 2012

I have a 20 inch Tru Cut. The drive chain broke and i had it replaced. Since then, it cuts super short - and if i adjust the height, nothing happens or it gets worse. What could the problem be?

Thank you for reporting this comment. Undo

Yer not doing the adjustment correctly!

    Bookmark   July 16, 2012 at 7:42PM
Thank you for reporting this comment. Undo

Thanks Rusty, but i have had the mower for 6 years and know how to adjust the cutting height. Something else seems to be going on

    Bookmark   July 16, 2012 at 10:50PM
Thank you for reporting this comment. Undo
david_tx(7a North Texas)

Well, that's odd. I've repaired my drive chain several times without issue. I do disconnect the control rod to get to the chain but it should be obvious if it wasn't reconnected. Other than that, the drive chain has nothing to do with the height adjustment.

Believe me, I have two left hands with all thumbs when it comes to being a mechanic. If I can't screw it up I can't imagine how anyone else could.

    Bookmark   July 19, 2012 at 6:19PM
Sign Up to comment
More Discussions
snow throwing
older blower. 7hp, 24" width, 14" auger....
Briggs and Stratton spark plug confusion
I've got a B & S opposed twin 422707 on a Craftsman...
Champion Spark Plug lack of quality
Picked up a set of RJ12C's to have on hand when I do...
Looking to replace the LB
I've been using a 2003 Lawnboy 10323 for over a decade...
Bad ignition coil magneto on Tecumseh
Is there a more economical solution to replacing a...
© 2015 Houzz Inc. Houzz® The new way to design your home™