Need help identifying my Husky zero turn.

c3pilotAugust 9, 2014

I need some help identifying a mower I just picked up. It's a Huskyvarna zero turn 42" chain hung fabricated deck with a 18hp Kawasaki motor. It is WELL used and all the decals are gone including the one on the frame to the right of the engine with model and serial #'s.

I know a pic would be very helpful but I don't have one right now.

The deck height adjustment is hand operated and comes up by your right knee and bends outward 90 degrees. It has two belts; one PTO driven goes to the deck. The other engine driven goes to the 2 separate hydro pumps ( not sure what those are called). Single roller on the front center of the deck.

It seems like a heavy duty little machine that should be easily repaired for many years to come....and having the #'s would no doubt make that easier. Any help would be greatly appreciated


Thank you for reporting this comment. Undo

Here's a pic.

The pumps are not directly hooked to the wheels but have hydraulic lines that run to the wheel drives. The drives are Parker units.

This post was edited by c3pilot on Sun, Aug 10, 14 at 7:04

    Bookmark   August 9, 2014 at 7:05PM
Sign Up to comment
More Discussions
New Honda HRX Drive System
I see where Honda is presenting a new drive system...
Craftsman Lawn Mower Model#917258860 won't turn left
I just bought a Craftsman Lawn Mower with a 46"...
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Need Craftsman mower grass bag
I have a very old, but really good condition Craftsman...
Advice Needed on a Used Mclane Reel Mower
Hello! I live in Southern California (San Fernando...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™