please help trying to figure out where an how to time it 1p70fua

bigdaddy1974September 4, 2011

i took the pan off because the gasket blew out when i did the cam gear fell out.where do i find instruction on doing this.it's a cub cadet #1p70fua chinese motor

Thank you for reporting this comment. Undo
tomplum

These have a dot on both the cam and crank gears. Align them and the valve timing is on.

    Bookmark   September 4, 2011 at 8:12PM
Thank you for reporting this comment. Undo
bigdaddy1974

thank you so much for your help!

    Bookmark   September 4, 2011 at 10:00PM
Sign Up to comment
More Discussions
New Toro Push Mower?
I am looking to replace an 11 year old Toro Recycler,...
seashells18
Engine trouble! B&S 13.5hp
My old Heritage ride-on has a Briggs& Stratton...
Over_here
New Honda HRX Drive System
I see where Honda is presenting a new drive system...
skipmarr
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
snapperfreak
John Deere L110
The mower has been sitting for 3 years, it ran when...
paddlingjohn
© 2015 Houzz Inc. Houzz® The new way to design your home™