Honda HRT 216SDA How to replace left handle bracket

DutchmanBoyerOctober 15, 2011

I need to replace the left handle backet on my Honda HRT216SDA mower. Do I need to remove the entire drive system to get the 3 bolts that attach this bracket to the mower deck? The 3 bolts are inaccessible since they are behind the drive unit. Only other option may be to remove the grass shoot plate rear discharge to access these bolts.

Thank you for reporting this comment. Undo
rosemallow(z7 Md)

Yes remove the sheet metal grass chute. You should be able to reach in and get to the nuts,

    Bookmark   October 15, 2011 at 7:39PM
Thank you for reporting this comment. Undo
DutchmanBoyer

I got the left bracket installed. Yes. I did need to remove the rear grass chute. It took me and my mechnically inclined neighbor nearly 1.5 hours to remove the plate which required removing one wheel and gear drive assembly to remove the chute plate. Mower is ready for action now. Thanks for your help and for Mr. Fixit next door. I

    Bookmark   October 16, 2011 at 2:38PM
Sign Up to comment
More Discussions
john deere RX75 belt diagram
I have a Rx75 with 9hp motor. I bought it used and...
jeremy_2010
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
radlee30458
Snapper commercial refurb
This is the 1986 snapper 21500PC that I found in the...
snapperfreak
John Deere L110
The mower has been sitting for 3 years, it ran when...
paddlingjohn
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Nutty1269
© 2015 Houzz Inc. Houzz® The new way to design your home™