1953 Lawn Boy Piston Rings ????????

brady3November 8, 2013

Hi...I was wondering if anyone would possibly have the piston rings part number for a 1953 lawn Boy Mower with the Iron Horse Motor > Model Number on Frame (deck) 8FH12LB serial number..(engine) on gas tank strap A10-268967....I would love to get the old girl back to mowing once more !!! Thanks Dave

Thank you for reporting this comment. Undo
Mike72

Check your ring width and bore diameter. The C 10 may be the one you need.

Here is a link that might be useful: Hastings Piston Rings Lawn Boy

    Bookmark   November 23, 2013 at 11:04AM
Thank you for reporting this comment. Undo
bogman

Brady,
The Hastings piston rings won't fit your A motor. The A is 1 3/4 bore and the C-10 is 1 15/16. Your best bet is to keep an eye on Ebay. Good luck.

    Bookmark   November 27, 2013 at 3:26PM
Thank you for reporting this comment. Undo
tinkerer_gw

I think I have NOS Rings for the A-Series Engines in stock. Will be back home after the first of the year and will check then.

    Bookmark   December 24, 2013 at 6:49PM
Thank you for reporting this comment. Undo
paul6977

I was wondering if you had anymore iron horse parts including rings thank you

    Bookmark   September 29, 2014 at 11:38PM
Sign Up to comment
More Discussions
Craftsman ZTS 7500
Going to look at a used one of these tomorrow. Anything...
radlee30458
Snapper 21 BBC Rehab complete! see pics
Guys, Finally after much effort I finished the Snapper...
quickrick
B&S OHV 6.5 won't start
If I prime the engine 5/6 times it starts on the second...
mvron
I have a Tecumseh 5hp egine no spark
I measure the ohms from the following. I placed one...
Nutty1269
Reel Mower for Bermuda Lawn?
I was looking at the Fiskars StaySharp Max Reel Mower...
void.pointer
© 2015 Houzz Inc. Houzz® The new way to design your home™