Stihl blower

jpleech(zone5-6/MO)November 27, 2013

I have a stihl br 380 blower that took a fall earlier today, and humpy dumpy here is trying to put it back together. I believe what happened is that when it fell it knocked the throttle cable off it's seat at the trigger. Any way, it starts and runs just fine, but the trigger is lose and doesn't pull the cable. I've check the Cale at the carburetor and it's still attached. Does anyone know how the cable is supposed to seat of the trigger mechanism? I'm at wits end here. A picture or a link to a diagram would be worth lots.

Thanks, John

Thank you for reporting this comment. Undo
tomplum

If it seems that where the outer cable is loose, you may have damaged it inside the handle. The cable will likely have a formed/ crimped lip that is held in a slot inside the handle.

    Bookmark   November 28, 2013 at 1:32AM
Thank you for reporting this comment. Undo
Sign Up to comment
More Discussions
Husqvarna 150bt blower running lean - harder to start
Blower is taking 3 - 5 pulls to start when it used...
edge
Gas leak in Toro CCR 3650 Snowthrower
Hello all, I know this is a lawn mower forum, however...
jlaak5
PTO Problem on my Lawn Mower
I was just outside mowing and I hit an obstruction...
amburton98
Charger for/charging a Toro GTS 6.75 hp
I recently acquired a several year old Toro GTS 6.75...
bkay2000
Kohler Knowledge
I am replacing my 2nd B&S 23HP engine on a Simplicity...
wekjo
Sponsored Products
Modern Indoor/Outdoor Bungalow Flooring Rugs WaterGuard Bluestone Lawn/Garden
Home Depot
Broan Evolution 2 Series 36-inch Stainless Steel Under-cabinet Range Hood
Overstock.com
Cabernet White Wine Glass - Holmegaard
$40.00 | HORNE
Bolero LED Pendant with 4" Monopoint Canopy
LBC Lighting
Leaf Sconce w/Scroll Mounting by Bacchus Glass
$585.00 | Lumens
Shop Vac Wet and Dry with Pump
$199.00 | FRONTGATE
© 2015 Houzz Inc. Houzz® The new way to design your home™