wheelhorse 312-8 tractor

shamelessDecember 7, 2011

Hi All:

I am a newby!!!

I have aquired a 1988 Wheelhorse 312-8 with the Kohler Magnum 12 hp engine.

I got it running

The unit will only idle.

I can see one part of the throttle move when the throttle is raised or lowered at the dash control.

The second bar does not move.

the second bar goes to the carb.

I am able to rev the motor up manually at the carb.

I suspect that the previous owner messed up the springs or something.

I am seeking a diagram or description of how these two linkages interact or how they are supposed to work.

Thank you in advance and I hope that one of you out there can help me out.

I am trying to get this unit ready for snow, I remove the snow for 5 of my neighbors, all retired or widowed or both.

The walk behind snowblower requires too much time and energy.

Thanks again.

Thank you for reporting this comment. Undo
baymee(LehighValleyPA)

I'll try to take a picture or video of mine, this afternoon.

    Bookmark   December 9, 2011 at 5:40AM
Thank you for reporting this comment. Undo
baymee(LehighValleyPA)

In the second picture, the linkage is the one closest to the engine shroud.



    Bookmark   December 9, 2011 at 4:31PM
Sign Up to comment
More Discussions
Reel Mower for Bermuda Lawn?
I was looking at the Fiskars StaySharp Max Reel Mower...
void.pointer
john deere RX75 belt diagram
I have a Rx75 with 9hp motor. I bought it used and...
jeremy_2010
Bad ignition coil magneto on Tecumseh
Is there a more economical solution to replacing a...
don_v
Mclane 20" mower at Sears... why so inexpensive?
Hey everyone, I want to get yall's input on a mower...
bobbarker14
Bosch Rotak 36 Rotary Lawnmower
I am currently studying for a Horticulture qualification...
jen9716599
© 2015 Houzz Inc. Houzz® The new way to design your home™