Troy Bilt Super Tomahawk Chipper Shredder

gdjoslinJanuary 9, 2014

I have a 1 3/4 inch screen and a 3/8 screen looking for 1 inch or a 3/4 inch screen. Don't see any on EBay. Does anyone know where to get one?
Thanks
Troy Bilt Super Tomahawk Chipper Shredder
Model 47251.

Thank you for reporting this comment. Undo
gator_rider2(z8 Ga.)

You need to have one hand made at machine shop take one your in have change hole sizes. If handy you may can make it

Here is a link that might be useful: Chipper parts may not be your model

    Bookmark   January 9, 2014 at 7:42AM
Thank you for reporting this comment. Undo
mla2ofus

Just weld 1" flat washers over the holes of the 1 3/4" one and drill out every other hole in the 3/8" one to 3/4". Crude but cheap. Don't know the cost but as GR said a welding shop could probably make them.
Mike

    Bookmark   January 9, 2014 at 10:15AM
Thank you for reporting this comment. Undo
gdjoslin

I want to keep my larger screen in TAC.
There are no machine shops in my area that are equipped to do the job.

Thanks

    Bookmark   January 9, 2014 at 7:12PM
Thank you for reporting this comment. Undo
mla2ofus

Too bad we're not neighbors. W/ some 12 ga metal and good quality 1" and 3/4" hole saws we could make some pretty easy.
Mike

    Bookmark   January 9, 2014 at 10:37PM
Sign Up to comment
More Discussions
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Electric shredder motor will switch on but won't spin the blades
Hello, I have an electric garden shredder that will...
Lindsay Durdle
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
© 2015 Houzz Inc. Houzz® The new way to design your home™