Homelite UT8010B Primer Bulb

jrtmouseJanuary 27, 2010

Homelite Blower (UT8010B) primer bulb is busted which probably explains why it won't start. I've found three different replacement bulbs online but not sure which model the carburetor is. They fit Walbro carburetors but there are several different model numbers of carbs (HDA, WZ, WA, etc...). Anyone have any ideas where I can find these letters on the carburetor? OR perhaps someone has this model of blower and could share this information?


Thank you for reporting this comment. Undo
canguy(British Columbia)

The letters are quite prominent on Walbro carburetors. If a Zama, you will need good eyes or glasses to see them.

    Bookmark   January 27, 2010 at 9:34AM
Thank you for reporting this comment. Undo

Unfortunately, I've been unable to locate these prominent letters on the carburetor. I can clearly see where WALBRO is but nothing more. Where would I find the model numbers in regard to "WALBRO"? Should they they be on the same side? On the back side...that is not so accessible? If you would point me into the right direction, I will look for them.

Thank you!

    Bookmark   January 30, 2010 at 11:21AM
Thank you for reporting this comment. Undo
canguy(British Columbia)

Take the bulb to a small engine shop, most should be able to match it up. Homelite only offers a complete carb replacement, no repair parts.

    Bookmark   January 30, 2010 at 12:42PM
Thank you for reporting this comment. Undo

I was able to take the bulb into a local mower shop and they were able to sell me a new bulb for about $5. We're up and running now!

Thanks for the advice! Sometimes I think I'm so confident that the internet will provide what I need, I forget about local shops and sometimes they really are easier.

    Bookmark   January 31, 2010 at 3:46PM
Sign Up to comment
More Discussions
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
Sears air compressor engine won't run when plugged in
Sears Paint Sprayer/Air Compressor Model No. 106.153542...
Older Troy Built Tiller Model ID
Trying to indentify model number of my unit. It is...
Predator 212cc Engine, Harbor Freight FYI
Hi Folks, Been thinking of getting one of these for...
Primer not getting Gas?? After Carb Rebuid?
I just rebuilt a couple snow blower Carbs (both Tecumseh...
© 2015 Houzz Inc. Houzz® The new way to design your home™