old atlas tiller

brad_2010January 10, 2010

I have an old atlas tiller i belive to be a 1975 model #c2-5015. I am i search of the bronze gear that drives the tines. Can any one help me.

thank you

Thank you for reporting this comment. Undo

Below is the link for the parts manual. It shows as a #101-57 gear- which is shown as NLA. Some research may find it though if you can dig up someone with old General Power inventory. I don't know enough about your tiller to know what may be comparable.Eventually they were eaten by MTD like many other things.

Here is a link that might be useful: Oscar Wilson

    Bookmark   January 10, 2010 at 10:17PM
Sign Up to comment
More Discussions
No more roll pins
Finally got the roll pins out of the wheels on my Horse...
Older Troy Built Tiller Model ID
Trying to indentify model number of my unit. It is...
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
Mantis tiller will not idle
Picked up a used Mantis (SV-4/A engine) that will just...
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
© 2015 Houzz Inc. Houzz® The new way to design your home™