McCulloch chainsaw auto oiler

glynn(z7 MS)January 22, 2010

My McCulloch (model 600134140)20" chainsaw's automatic oiler has completely stopped working. Also, the manual oiler works, but is very hard to depress - about wear your thumb out trying to push the button in. Seems like the manual oiler becomes harder to push as the saw warms up.

I have tried blowing compressed air into the oil outlet and rinsed out the oil reservoir with fuel in case there is trash in there.

Anyone got any ideas? Thanks - Glynn

Thank you for reporting this comment. Undo
canguy(British Columbia)

That model doesn't compute, are you sure it isn't the serial number? A little more information would help.

    Bookmark   January 22, 2010 at 9:17PM
Thank you for reporting this comment. Undo
glynn(z7 MS)

Sorry, I did miss the model number by one digit.

Here are the numbers listed on the ID plate:

60013414
11-134275

This was sold in a store as a refurbished saw, in case that makes a difference. It is probably about 12 years old. - Thanks

    Bookmark   January 23, 2010 at 11:04AM
Sign Up to comment
More Discussions
Craftsman Snow Blower - Drive problem
During our big storm last week i noticed I started...
rspin
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Predator 212cc Engine, Harbor Freight FYI
Hi Folks, Been thinking of getting one of these for...
exmar
Any Good Electric Brushcutter?
I have a small area, my lot is just 1/2ac and less...
InFlux
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
bertman_gw
© 2015 Houzz Inc. Houzz® The new way to design your home™