Genie screw drive garage door opener problem

betlebumJanuary 22, 2013

HELP! Our screw drive garage door opener has a problem.
It won't open or close....just sounds like it's working. If you manually close it & then disengage the door via the rope & then re-engage it the it will open & close maybe once and then it stops again. What would cause this?

Thank you for reporting this comment. Undo
loger_gw

When it sounds as if it's running but not working , "is the screw turning"?

1. If it's not turning, remove the overhead drive's cover and look for stripped or worn gears.

2. If the screw is turning when running but no door engagement, look for stripped or worn gears at screw/engager.

    Bookmark   January 23, 2013 at 11:04AM
Sign Up to comment
More Discussions
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Kohler K181 valve clearance
The engine would run perfect for maybe 30-45 minutes,...
snuffyinatl
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
bertman_gw
Mantis tiller will not idle
Picked up a used Mantis (SV-4/A engine) that will just...
ccarlsonnh
Any Good Electric Brushcutter?
I have a small area, my lot is just 1/2ac and less...
InFlux
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™