Generac pressure washer tip suggestions

mvronFebruary 28, 2014

I have inherited a Generac model 09617-0 type 6600 PSI 2200 - GPM 3.0. I don�t know anything about pressure washers. The engine does run (Briggs I think) and the pump does put out water. I need to put sprayer tips on the wand. Enclosed is a picture of what I have on the end of the wand. Do I need a quick control spray nozzle and then attach the spray tip to the nozzle - or can I attach the spray tip to the end of the wand with the extension in the pic. Does the GPM 3.0 refer to the quick control spray nozzle size? I noticed that the spray nozzle comes in a 3.0 size. Does the threaded part of the wand extension measure 1/4"? I only want one tip - not an assortment of several. I assume that the different size tips (3.0,3.5 etc) refers to the tip point. Appreciate suggestions.

Thank you for reporting this comment. Undo
MantonJohn

Get a turbo nozzle, you will love it. You will think you have a big pressure washer.

    Bookmark   March 3, 2014 at 12:11PM
Thank you for reporting this comment. Undo
mvron

Will that turbo nozzle screw right on to the wand extension in the pic?

    Bookmark   March 3, 2014 at 6:36PM
Sign Up to comment
More Discussions
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
Troy Bilt Pony Tiller
I have a Troy Bilt Pony Tiller with a 5 HP Briggs and...
beeer_2008
Primer not getting Gas?? After Carb Rebuid?
I just rebuilt a couple snow blower Carbs (both Tecumseh...
bertman_gw
Best gas leaf blower?
Can anyone recommend a good gas powered leaf blower?...
robar
Craftsman Snow Blower - Drive problem
During our big storm last week i noticed I started...
rspin
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™