Rubbermaid Cart Replacement Wheel

terissdMarch 30, 2008

My husband hauled a heavy load in my beloved Rubbermaid cart and snapped off one of my wheels. Has anyone ever replaced a wheel on their cart? I have no idea where to get one.

I can't say enough good things about my Rubbermaid cart! I've had it for years and years and use it constantly in the garden. Probably my most used garden tool! (It's one of the big ones)

Thank you for reporting this comment. Undo
masiman(z7 VA)

Try someplace like Graingers. I am not sure about the wheels on the Rubbermaid but my guess is they are plastic. I have not seen plastic wheels for sale, only steel.

    Bookmark   March 31, 2008 at 9:16AM
Thank you for reporting this comment. Undo

Would these wheels work? They are on Ebay. See the link below.

Here is a link that might be useful: Wheels on Ebay

    Bookmark   April 1, 2008 at 2:19AM
Thank you for reporting this comment. Undo
turnage(z7a TX)

I think you can find what you need at McMaster-Carr's website. On their homepage, look under Material Handling and click on wheels. That will take you to page 1286 and you can go from there.

This link was posted here several weeks ago and I want to thank the OP for it.

Here is a link that might be useful: McMaster Carr homepage

    Bookmark   April 1, 2008 at 7:06AM
Thank you for reporting this comment. Undo

Try this site. According to Rubbermaid they make the carts.

    Bookmark   April 1, 2008 at 11:01AM
Thank you for reporting this comment. Undo

Here is my solution:

Free shipping. The bore on this wheel is 3/4" and the shaft is 5/8" so you will need a flanged sleeve (2 per wheel) available from;pf_rd_p=493388211&pf_rd_s=center-3

The tire is solid which is a plus but you should know that if you replace only one wheel, the original wheel is slightly larger so the cart will list to one side. I don't find it a problem.

    Bookmark   March 13, 2010 at 4:29PM
Thank you for reporting this comment. Undo

You need the medieval package. Put the wheel together as best as you can I used a piece of 1/2" plywood scrap that I sheet rock screwed into the side wall. I used a hole saw to cut out around the hub. I drilled and used #10-32 nuts and bolts to attach to them. The 1st one took some time, but the 2nd was easier.

    Bookmark   March 13, 2010 at 8:26PM
Thank you for reporting this comment. Undo

"You need the medieval package." AWESOME! My sister has one of these w a broken wheel . The "OEM" Rubbermaid ones were hecka expensive. I had mentioned that Lowes had some that may work for ~ $20- but don't know what happened. Andy, you should post a pic of the medieval version and I'll forward that along...

    Bookmark   March 14, 2010 at 12:56PM
Thank you for reporting this comment. Undo

Sorry, no pics. The repair piece was a piece of 1/2" plywood as big as possible to span the outside diameter of the wheel. Clamp it into place and trace out the cuts with a pencil.

    Bookmark   March 15, 2010 at 8:28PM
Sign Up to comment
More Discussions
1983 troy-bilt cultivator plus wheels
Read with great interest all the posts so far for the...
Woodzig electric pruner
I have a Woodzig electric pruner and use it often....
Waterproofing a basement
I get water in my basement just about every spring...
Old Troybilt Tiller Engine Replacement
I need to replace the eninge on my Troybilt tiller...
Have you successful cut any “seasoned firewood” inside?
Have you successful cut any “seasoned firewood”...
Sponsored Products
Kartell | Flip Trolley
Worlds Away - Roland Nickel Bar Cart - ROLAND N
Great Furniture Deal
Sunset Trading Calgary Kitchen Cart in White with Butcher Block
Beyond Stores
Parterre Tub Mat - WHITE/KHAKI (BATH MAT)
$165.00 | Horchow
Hunter Ceiling Fans Midas 1886 Limited Edition 60 in. Black Ceiling Fan Midas
Home Depot
Detroit 36-Bottle Floor Standing Wine Rack - 7237
$152.99 | Hayneedle
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™