Homelite XL UT#105064

roger234March 10, 2008

patrick123,

I have a Homelite XL saw as well. I'm interested in receiving a copy of your users manual. I'm also trying to get parts for it in order to get it running again but the label that shows the model number on it has worn off. If possible could you please tell me what the model number is on yours? This would greatly assist me in tracking down parts for my saw. If anyone knows of another way to identify the model number on these saws I would appreciate it.

Thanks

Thank you for reporting this comment. Undo
billw(5b - Kansas)

I do not need a picture, I can ID it for you.
Your model XL was made in 1978 and sold with a 12" hard tip bar. It can use a 16", 14" 10" or 8" as well.
Probably the best match is with a 12" Power Tip bar.
Any part you need is available.
Bill Walcott
700 N 12th
Marysville KS 66508
785-562-3539

    Bookmark   March 13, 2008 at 10:54PM
Sign Up to comment
More Discussions
Adjusting Carb on Toro S200 Snow Blower
I have a small 2 stroke Toro S200 Snow Blower that...
rgress
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Electric shredder motor will switch on but won't spin the blades
Hello, I have an electric garden shredder that will...
Lindsay Durdle
Older Troy Built Tiller Model ID
Trying to indentify model number of my unit. It is...
gardenerfrank
© 2015 Houzz Inc. Houzz® The new way to design your home™