Old Montgomery Ward (Gilson) Tiller Model 39032 D

steve3833March 28, 2007

Does anyone have a manual or know the proper configuration to re-install the drive belt on this tiller to get both forward and reverse to work? For that matter what the right size replacement belt would be? Any help would be greatly appreciated.

Steve in Dallas

Thank you for reporting this comment. Undo
ralphgumby

Steve-
I have pdf copies of older Gilson (MW) tillers I can send. One is for rear tine, the other two are front tine models. Each file is about 500k in size.
Let me know if you want them.
Ralph

    Bookmark   April 1, 2007 at 7:53AM
Thank you for reporting this comment. Undo
ham2154

My Dad just found 2 Montgomery Ward Garden Mark Lawnmowers with 4hp B&S motor. One is completely in tact, although not running. The other is missing a few parts... Know who might be interested in something like this? Or where I can get more info about them? the model number is TM020A.

    Bookmark   September 13, 2007 at 1:56PM
Thank you for reporting this comment. Undo
joeunderwood

looking for configuration for belts (two) on Gilson tiller old MW. forward reverse ?

    Bookmark   September 23, 2007 at 4:52PM
Thank you for reporting this comment. Undo
rahenson

I need two belts for a Gilson Tiller. The model # is 5118248247. I also need a phamplet to tell how to replace them.

    Bookmark   April 26, 2008 at 10:07PM
Thank you for reporting this comment. Undo
ralphgumby

I received a request from Superhog for a rear tine manual. I have no way of replying to you. Please provide an email and I will forward

    Bookmark   May 16, 2008 at 8:57PM
Thank you for reporting this comment. Undo
ratley

i need info on old montgomery ward tiller model 39032d i need to reinstall belts and not sure how to i would like any help if possable thanks brad

    Bookmark   May 18, 2008 at 4:57AM
Thank you for reporting this comment. Undo
mslelo

Hi,
I have a tiller Mont Ward model GIL-39007A. The problem is that I put apart the Idller arm assembly and link and now when I assmbled it the link seems too short even with belts off.Everything seems in place but stiil the link seems short by two and one half inches.
Any help is greatly appreciated.I can send pictures.
Thanks so much.Mslelo

Here is a link that might be useful: old montgomery ward tiller

    Bookmark   September 12, 2010 at 7:18AM
Thank you for reporting this comment. Undo
112jdw

GIL 39032D tiller parting out anyone interested? jake
112jdw@gmail.com i am in oregon
oh and lawn boy will send anyone a manual for gilson
brothers products for free (shows belt routing and adjustments)while you have them on the phone ask them for the belt part numbers as they have changed from the originals.

    Bookmark   July 2, 2011 at 3:18PM
Sign Up to comment
More Discussions
Woodzig electric pruner
I have a Woodzig electric pruner and use it often....
ranger_ric
Electrolytic Rust Removal
Has anyone tried this, using a battery charger, "washing...
exmar
MTD 8HP SnowBlower
I have an MTD 8hp SnowBlower Mod # 317E640F352. The...
Jeffery Smith
Dewalt 3800 pressure washer, open hole between pump and engine.
Hi, I just bought a dewalt 3800 pressure washer gx...
ron111
Building storage shed on a terraced slope
Is it safe to build a storage shed occupying two levels...
Thomas Lu
Sponsored Products
Ripley 1-lt Outdoor Wall Sconce
LBC Lighting
Mykonos Octopus Table
Grandin Road
Contemporary Indoor/Outdoor Fireside Patio Mats Rugs Doggy Chocolate 6 ft. x 9
$54.99 | Home Depot
Rotaliana | Cloud H Pendant Light
YLighting
Carnevale Rio Multi Quadro Wall Sconce by Oggetti Luce
$320.00 | Lumens
Uttermost Porano 6-Light 30" Wide Bronze Chandelier
Lamps Plus
Danze® Fairmont™ Single Handle Vessel Filler - Oil Rubbed Bronze
Modern Bathroom
DreamLine Elegance 39 to 41-inch Frameless Pivot Shower Door
Overstock.com
© 2015 Houzz Inc. Houzz® The new way to design your home™