overhauling a troybilt horse tiller

sven556(z5 Kansas)April 14, 2012

I recently received my grandfather's troy bilt horse tiller. It has serial number 525777. I think it's from the early 80's. It has the original 7hp kohler engine, which works great! The rest of the tiller needs some work. It leaks from about every source possible. I have replacement seals, that my grandpa bought, for the wheel shaft, tine shaft, and eccentric shaft. I need new seals for the front transmission. Where's a good place to order this?

It seems I will be doing an overhaul on the transmission. What should I look out for while doing this? I have noticed that the wheel shaft slides about 1/8" left to right, do I need to shim anything here?

Thank you for reporting this comment. Undo
loger_gw

I saw some possibly helpful info online w/o opening any vs YouTubs that I w/h opened (when I searched overhauling a troybilt horse tiller). Good Luck on what sounds to be a good project. loger

    Bookmark   April 15, 2012 at 12:19PM
Thank you for reporting this comment. Undo
gator_rider2(z8 Ga.)

Enjoy this almost all links you need.

Here is a link that might be useful: downloads for Troy Bilt

    Bookmark   April 16, 2012 at 4:05AM
Sign Up to comment
More Discussions
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
bertman_gw
Dewalt 3800 pressure washer, open hole between pump and engine.
Hi, I just bought a dewalt 3800 pressure washer gx...
ron111
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
gildomilo
Troy Bilt Pony Tiller
I have a Troy Bilt Pony Tiller with a 5 HP Briggs and...
beeer_2008
© 2015 Houzz Inc. Houzz® The new way to design your home™