en Way Speedy Hoe Tiller

charlene71April 4, 2009

I have an old Garden Way Speedy Hoe,with TC 200 engine. Also numbers 2026C 7138. With a Serial# HH108 on the machine. Looking for source for the 2 springs for Centrifugal Clutch.

Thank you for reporting this comment. Undo
dmullen(Southern CA)

Is this a model 352 speedy hoe by Garden Way?

I had one but the engine failed recently and I left the carcass with the dealer because it was in such good shape.

I have the manual for this machine and some tecumseh manuals and parts lists in pdf format if they would help.

Also, the dealer that worked on my machine may know a source for these springs.

You can email me if you want any of this info

    Bookmark   April 15, 2009 at 11:59AM
Thank you for reporting this comment. Undo
vocalteach2002_yahoo_com

Greetings from Northern CT.
You mentioned that you have the owners manual for a speedy hoe model #352. I have one that I'm trying to get back into shape. Had it running last summer but didn't use it and now I'm determined to try again. Could you send the manual to me? And I thank you in advance.

    Bookmark   January 11, 2011 at 6:12AM
Thank you for reporting this comment. Undo
vocalteach2002_yahoo_com

Several months ago you were kind enough to send me everything I needed to know about possibly rebuilding my speedy hoe 352. Unfortunately my computer went down and I lost that info. Would it be an imposition to ask you for that info again? Thank you again in advance.
Dean

    Bookmark   May 17, 2011 at 12:54PM
Thank you for reporting this comment. Undo
kram51

I have an old Garden way speedy hoe tiller cultivator.
I has been set up for years. I can not find parts for it. I think it needs a carburator kit. The engine is free and every thing else seems fine. I rebuilt the gear box and tines are painted like new. Engine is a Tecumseh #TC - 2026D 8158. The serial number of the tiller is #HH 028536

    Bookmark   December 23, 2011 at 4:10PM
Thank you for reporting this comment. Undo
pitterpats

Looking for operators manual to determine which way choke lever should be to start the engine. Should it be all the way to left when standing behind it, middle or all the way to the right (when standing behind it)?

    Bookmark   May 13, 2012 at 3:39PM
Thank you for reporting this comment. Undo
gator_rider2(z8 Ga.)

Look at very end of choke lever there Arrow made into lever end it points to choke position.

    Bookmark   May 13, 2012 at 5:34PM
Sign Up to comment
More Discussions
Any Good Electric Brushcutter?
I have a small area, my lot is just 1/2ac and less...
InFlux
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
Electric shredder motor will switch on but won't spin the blades
Hello, I have an electric garden shredder that will...
Lindsay Durdle
Electrolytic Rust Removal
Has anyone tried this, using a battery charger, "washing...
exmar
© 2015 Houzz Inc. Houzz® The new way to design your home™