Echo trimmer GT201R

coho(z8/9 N. Calif)April 25, 2013

4 or 5 years old and will not start. Good Spark. I soaked the carb block in the gallon can type carb cleaner. Flushed and dried the block and reassembled with a new carb kit.
Now it starts easily and cuts grass well but will not idle at all, even with idle screw all the way in. Would someone point me in the right direction, please.Thank you,
Coho

Thank you for reporting this comment. Undo
loger_gw

A youtube to watch at the bottom address or link. Notice in the video he will mention idling is a problem and I think he left it a little high for that reason.

1. Have you tried leaving yours a little high with the linkage screw vs mixture screw?

2. Are you saying you are not getting any changes when turning the idle mixture screw?

3. Have you checked to see if âÂÂAllâ your fuel lined are tight tight? Checked Spark arrest screen?

4. Will the primer bulb get hard and give good action X fuel movement when priming?

5. I fought that model or close for 3 yrs for fun when I had time.

6. The problem was opposite to yours. It started easy, idled but would die if you tried to run above idle.

7. Detecting the primer bulb was not sealed good, adding an o-ring for added pressure gave me high speed but a poor working idle.

http://www.youtube.com/watch?v=ghPFbpasx_0

Here is a link that might be useful: Youtube info

    Bookmark   April 25, 2013 at 7:53PM
Sign Up to comment
More Discussions
Troy Bilt Pony Tiller
I have a Troy Bilt Pony Tiller with a 5 HP Briggs and...
beeer_2008
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
Kohler K181 valve clearance
The engine would run perfect for maybe 30-45 minutes,...
snuffyinatl
Best gas leaf blower?
Can anyone recommend a good gas powered leaf blower?...
robar
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
© 2015 Houzz Inc. Houzz® The new way to design your home™