water in generac cool air generator engine.

loiqt2013April 22, 2013

I have generac 17KW generator. The engine accumulated water due the environment. Can I flush out the water by changing the oil more frequently? Do I change the oil filter too? Any recommendation is appreciated. Thanks.

Thank you for reporting this comment. Undo
mla2ofus

If the oil looks clean other than water in it, start and run it for a couple of hrs w/ or w/o a load. It should evaporate all the water. Short run times are the cause of this as the engine warms up just enough and when shut down atmosperic moisture condenses inside it.
Mike

    Bookmark   April 24, 2013 at 10:20PM
Sign Up to comment
More Discussions
Building storage shed on a terraced slope
Is it safe to build a storage shed occupying two levels...
Thomas Lu
1983 troy-bilt cultivator plus wheels
Read with great interest all the posts so far for the...
rayleman
Waterproofing a basement
I get water in my basement just about every spring...
huskymaniacny
Woodzig electric pruner
I have a Woodzig electric pruner and use it often....
ranger_ric
Deep Spader
Has anyone used a deep spader? How did you like it?...
svachon
Sponsored Products
Designers Choice Collection Lamps 17.5 in. Antique Brass Halogen Desk Lamp
$64.46 | Home Depot
Wood Samples: Millstead Flooring Oak Bordeaux Engineered Click Wood Flooring
$10.00 | Home Depot
Xten Office Chair
Italy Design
FUOCO Tabletop Gel Firepit by Blomus
$85.49 | Lumens
Serena & Lily Aubrey Shelf
Serena & Lily
EASY Circular Tray by Blomus
$35.09 | Lumens
Elk Lighting Racecar 2-Light Satin Nickel Pendant
Overstock.com
Tundra Rustic 18-Inch Three Light Chandelier
$613.80 | Bellacor
© 2015 Houzz Inc. Houzz® The new way to design your home™