Mantis Tiller not picking up fuel

tenneseeMay 19, 2013

I have a Mantis Tiller that will not pickup fuel to the carb. I have taken the carb apart, sprayed carb cleaner several times thru all the holes, ports, jets, holes under the welch plug and yes I did remove the two speed adjustment screws when I cleaned this out. I installed a new carb rebuild kit and a new primer bulb and primer base ( the carb is a Zama C1U K54) and replaced the fuel lines (the dealer gave me 'grey' colored replacement lines?) The primer bulb when pushed several times will not pick up fuel from the tank. I can hear the return to tank valve open but ???? The tiller starts and runs good if I put fuel thru the choke throat and will run till all that fuel is gone, what Gives? Can someone help!!!!!!!!!!

Thank you for reporting this comment. Undo
gator_rider2(z8 Ga.)

They a check valve in carb. that close makes primary pump work if its destroy I've replaced Carburetor on my engines.

    Bookmark   May 19, 2013 at 11:10AM
Sign Up to comment
More Discussions
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
bertman_gw
Electrolytic Rust Removal
Has anyone tried this, using a battery charger, "washing...
exmar
2-cycle engine troubleshooting
My 2-cycle blower cannot be started. There is a hot...
slim50
Troy Bilt Pony Tiller
I have a Troy Bilt Pony Tiller with a 5 HP Briggs and...
beeer_2008
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™