Troy Bilt Pony Tiller

beeer_2008May 7, 2008

I have a Troy Bilt Pony Tiller with a 5 HP Briggs and Stratton engine. The rear sheild is missing and therefore I do not know the Model Number. I am trying to get ahold of a parts manual and/or owners manual. I need some parts, belts, the rear shield, etc. The Motor Model Number is 130292 Type 3220-01. Can anybody help me with a Model Number, manuals or at least the belt part number?

Thank you for reporting this comment. Undo
bill_kapaun

Go to-
http://www.m-and-d.com/parts.html
Click the Illustrated parts diagrams online.
Click "Click here for parts look up"

On the menu on the upper left, select-
Troybilt
Pony Tillers

There's quite a few 5HP tillers, but maybe you can narrow yours down?

    Bookmark   May 8, 2008 at 12:32AM
Thank you for reporting this comment. Undo
biglumber(5)

I have a 82' model.

Drive belt is 1/2 inch by 24.
Reverse belt is 3/8 inch by 22. I buy them at ace hardware.

Troybilt numbers..
Drive # is 9201
Reverse # is 9200

I have the same engine number as yours. I also have a pdf parts diagram of my model. Let me know if you want it.

Peace

    Bookmark   May 9, 2008 at 10:45AM
Thank you for reporting this comment. Undo
bill_kapaun

The CODE on the engine is the date IT was built.
YYMMDDzz
If it's original, expect it to be slightly older than the tiller.
Engine IPL's are available from the Briggs site.

http://www.briggsandstratton.com/maint_repair/manual_and_more/

    Bookmark   May 9, 2008 at 4:09PM
Thank you for reporting this comment. Undo
amigatec(7a Oklahoma)

The Forward belt is a 9201 and is 23 1/2 long and 1/2 wide.
The Reverse belt is a 9200 and is 22 1/2 long and 1/2 wide.

These are TB's numbers.

Hope this helps.

I have a '78 Model

    Bookmark   October 12, 2008 at 9:01PM
Thank you for reporting this comment. Undo
ginger1955

I have just purchased a Pony Tiller. The only #'s I can locate are stamped on the case - 79396. I would like to located information/manual on this tiller. M&D's # are all larger. Any help would be appreciated. Thanks, Gin

    Bookmark   October 13, 2008 at 12:49PM
Thank you for reporting this comment. Undo
amigatec(7a Oklahoma)

The SN# is hand stamped on the rear of the transmission on the older Pony's.

Here is the link for the older Manuals, Just use Pony as the model and 1 for SN.

Here is a link that might be useful: TroyBilt Manuals

    Bookmark   October 13, 2008 at 8:23PM
Thank you for reporting this comment. Undo
amyjackson

biglumber.. I would love to have that .pdf if you dont mind sending it to me. I am having trouble getting the carb back together and need a diagram to help me out. Let me know..

    Bookmark   May 17, 2009 at 9:15PM
Thank you for reporting this comment. Undo
sert_optoline_net

I just got a 79 pony. Oil leak around tines. Where can I buy a oil seal set??
thanks

    Bookmark   April 25, 2010 at 9:42PM
Thank you for reporting this comment. Undo
tman52

I just bought an old pony, the brigs 5 hp motor has a code of 1993. The exhaust valve was stuck, and previous owner thought motor was blown. I got it to run, but while taking the motor apart, I forgot how the throttle linkage attaches and the kill wire from coil attaches. The briggs site is no help, the correct manual does not show the connection, only the exploded view. Can anyone help?

    Bookmark   January 29, 2012 at 7:46PM
Thank you for reporting this comment. Undo
tman52

I just bought an old pony, the brigs 5 hp motor has a code of 1993. The exhaust valve was stuck, and previous owner thought motor was blown. I got it to run, but while taking the motor apart, I forgot how the throttle linkage attaches and the kill wire from coil attaches. The briggs site is no help, the correct manual does not show the connection, only the exploded view. Can anyone help?

    Bookmark   January 29, 2012 at 8:28PM
Thank you for reporting this comment. Undo
greenman20

Need help identifing Troy Bilt Pony tiller with serial # S212583 stampin on tail tube. Do not have model #.

    Bookmark   May 17, 2014 at 9:29PM
Thank you for reporting this comment. Undo
hippy

I only have information up to Jul - 1983 serial #S129028.

With the fifth number being 5. I would think that you have a 1985 Pony III or IV depending on the engine.

S212583

    Bookmark   May 17, 2014 at 10:03PM
Thank you for reporting this comment. Undo
Raymond DeLea

I have a 1985 TroyBilt Pony tiller with a Briggs and Stratton 5HP 206cc engine (Model #130292, Type 1900 01, Code 85011407). Is it possible to re-engine this tiller with the newer Briggs & Stratton model 12S492-0070-F8 engine? I've heard both a yes (from Briggs) and a no (from others) on this issue. I need to know for sure.

    Bookmark   February 17, 2015 at 9:55AM
Thank you for reporting this comment. Undo
gator_rider6

Harbor Freight engine work just add more oil so want cut off if over tilt 4 oz. Engine more hp but no problem you loose reverse that no problem either.

    Bookmark   February 18, 2015 at 6:58PM
Sign Up to comment
More Discussions
Sears air compressor engine won't run when plugged in
Sears Paint Sprayer/Air Compressor Model No. 106.153542...
Cletus77
Craftsman Snowblower Recall
Did anyone else receive a recall notice in the mail...
pjrsjr
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
slowpoke_gardener
Have you successful cut any “seasoned firewood” inside?
Have you successful cut any “seasoned firewood”...
loger_gw
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™