sthil fs 36 weed whaker

codger01June 9, 2010

dose any1 know where I can find a shop manuel for this

machine ? I have to do a carb clean ! I dont want

to disasemble any unnessacary parts!

Thanks Codger (Al )

Thank you for reporting this comment. Undo
fish40037

You just need a big flat tip screwdriver to rmove the air
filter cover, and a t-27 torx driver to remove the two carb screws and the other 4 cover screws that hold the outer cover on, and you can get the carb right off.

    Bookmark   June 9, 2010 at 8:51AM
Thank you for reporting this comment. Undo
evdpgh

"a t-27 torx driver to remove the two carb screws and the other 4 cover screws"

Can someone, anyone, tell me why they choose to use a t-27? My Echo trimmer also has t-27 screwa. I have loads of bits and drivers in t-25 and t-30, but had a heck of a time finding a t-27 in my tool collection. Is t-27 the perfect size application or did some engineer just choose this size for yucks?

    Bookmark   June 9, 2010 at 4:23PM
Thank you for reporting this comment. Undo
codger01

Thanks guys ! That guy who picked T27 Is having a giggle
The problem was finding 1 long enough, but the task was done & all is well. purring like a new kitten!
this is the first time it has bobbled since new(97) maybe
time to invest in a new spake plug ?
Later ,,,, Codger01 (al)

    Bookmark   June 9, 2010 at 5:14PM
Sign Up to comment
More Discussions
Garage Door Opener Repair tips PT1 long
Hi all, it seems to me that in general GDO posters...
techdave
honda snowblower problem
i have a honda 928 snowblower... good machine, but...
rudall
Building storage shed on a terraced slope
Is it safe to build a storage shed occupying two levels...
Thomas Lu
New Ryobi S430 engine dies on full throttle
Just bought a new Ryobi straight shaft 4 Cycle S430...
losrubios
Temperature alarm app for Android?
I am wondering if anyone knows of an Android app that...
armbarangel
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™