troy built tiller problem

joe_the_dutchman(ontario canada)June 4, 2010

this 8hp rear tine is stating to slip sometimes.i checked the belt and it looks not to bad but can that be the only thing that would that could cause this .is there any adjustment on the tightener.i bought it second hand without a manual.info apreciated

Thank you for reporting this comment. Undo
mla2ofus

A little more info is needed. Is this an old TB or newer style. Does the entire engine and mount slide up and down on two rods or does a flat idler tighten the belt?
Mike

    Bookmark   June 4, 2010 at 1:06PM
Thank you for reporting this comment. Undo
joe_the_dutchman(ontario canada)

i believe the engine moves up and down on atubular frame.could i tighten the belt on this one

    Bookmark   June 5, 2010 at 12:03PM
Sign Up to comment
More Discussions
What locked my Neighbor’s 6.5 Briggs Quantum Edge Engine?
I wanted to see what locked my Neighbor’s 6.5 Briggs...
loger_gw
Have Chipper/Shredder for trade
I have a very nice gas powered wood chipper/leaf shredder...
charlieboring
Building storage shed on a terraced slope
Is it safe to build a storage shed occupying two levels...
Thomas Lu
honda snowblower problem
i have a honda 928 snowblower... good machine, but...
rudall
Disgusted with my Mantis tiller
I've had a Mantis tiller since Spring of 2005. It's...
mitchb2
Sponsored Products
Drift Wall Sconce by Troy Lighting
$280.00 | Lumens
House of Troy Cambridge Antique Brass Swing Arm Wall Lamp
Lamps Plus
Troy Lighting Livingston Traditional Outdoor Wall Light
1800Lighting
House of Troy Deco Basket Brass Swing Arm Wall Lamp
Lamps Plus
Copper Mountain Wall Sconce by Troy Lighting
$264.00 | Lumens
Verona Outdoor Postmount by Troy Lighting
$396.00 | Lumens
Troy Lighting Morgan Hill Traditional Outdoor Wall Light
1800Lighting
House of Troy Newport Pewter Finish 6-Way Floor Lamp
Lamps Plus
© 2015 Houzz Inc. Houzz® The new way to design your home™