troybuilt tiller breather

tom_nwnj(z6 NJ)June 3, 2010

This is an 30 year old Troybuilt Horse

5hp Tecumseh

Model HH 60 - 105115H)

Loosing oil out the valve cover. Makes a real mess too.

1) where do I get one of these breather hoses?

2) do I need to take off the valve cover and clean whatever dirt is in there also (need new valve cover gaskets, etc? or just put everything back). Or just leave it be??

Thanks!

Thank you for reporting this comment. Undo
gardendawgie(5)

Dealers are everywhere around here. They can get you any part and good advice.

    Bookmark   June 3, 2010 at 4:22PM
Thank you for reporting this comment. Undo
tom_nwnj(z6 NJ)

OK, OK. Generally, dealers around here just sell the big tickets, so I don't generally ask about anything else.

So, I googled around, and found that Tecumseh has a great website, and I found the whole parts diagram for my engine (30 years old). I got the part numbers, then went to Jacks, and there they were. $12 including shipping for everthing.

What had me confused is that Homer Simpson has been swearing for years that the internet is ruining his life.
Homer is right on a lot of stuff, but not that.

    Bookmark   June 3, 2010 at 5:03PM
Sign Up to comment
More Discussions
honda snowblower problem
i have a honda 928 snowblower... good machine, but...
rudall
cultivator or tiller or both
In the past I've manually tilled and cultivated my...
Bushwhacker Blood
Woodzig electric pruner
I have a Woodzig electric pruner and use it often....
ranger_ric
Who Makes This 'New' Craftsman 50cc Chain Saw?
Doing a little research on possible replacement saws......
pgtr
New Ryobi S430 engine dies on full throttle
Just bought a new Ryobi straight shaft 4 Cycle S430...
losrubios
© 2015 Houzz Inc. Houzz® The new way to design your home™