Poulan Pro rough running/ back firing at load/high rpm
I have a Poulan Pro HD1842 with an 18 OHV B&S motor.
Family 5BSXS.5012VP 276016
I have been running into the issue where when I would start the tractor at low idle it would normally be fine - once I increase the throttle about half way the engine would die down and start to backfire and want to die out.
If I try to engage the deck the same thing would happen - also if I use speed 5 and up on the tranny same issue.
I changed the plug already today - 45 minutes of running checked the plug and have black build up on it already.
This post was edited by central50 on Sun, Apr 13, 14 at 13:24