Fuel Line Routing Craftsman Chainsaw

bankerjohn(8 NC)June 23, 2011

Need some help putting in new fuel lines on my Craftsman chainsaw (358.352180). All the old lines have disintegrated to the point I can't tell what connection routes to where!

This saw has a primer bulb with 2 nipples ... one marked TANK and the other marked CARB. Questions: large or small line? from which nipple? to which destination? ... and if the destination is the carburetor, which connection?

See below for a picture of the carb showing the 2 fuel line connectors ... and the primer bulb.

Thank you for reporting this comment. Undo
bankerjohn(8 NC)

Don't know where I came up with the name Hasbro ... but here's the same carb picture labelled correctly as a Walbro !!

    Bookmark   June 23, 2011 at 11:01PM
Thank you for reporting this comment. Undo
bankerjohn(8 NC)

I found a video explaining the fuel line routing on the Poulan 2150 saw ... which I believe to be virtually identical to the Craftsman model I have.

Here is a link that might be useful: Fuel Line Configuration on Poulan 2150 Chainsaw

    Bookmark   June 24, 2011 at 1:22AM
Sign Up to comment
More Discussions
Snowblowers and engine choices - Ariens vs Toro vs Simplicity and
I live on the shoreline in CT, where we get anywhere...
bfguilford
Sears air compressor engine won't run when plugged in
Sears Paint Sprayer/Air Compressor Model No. 106.153542...
Cletus77
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
lil_rhody
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
bertman_gw
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™