old remington chainsaw question

joe_the_dutchman(ontario canada)July 27, 2009

i got this old 60s vintage chainsaw runing only to find out the gas tank leaks.it apeares that the tank comes apart on the fly wheel side.the whole left side of the chain saw comes apart also taking the side of gas tank off.not being able to get new gasket what should i use to seal this unit.info apreciated also if any one knows what model it could be

Thank you for reporting this comment. Undo
masiman(z7 VA)

If you don't get an answer here, I'd try posting this in the Chainsaw forum at Arboristsite.

    Bookmark   July 27, 2009 at 1:46PM
Thank you for reporting this comment. Undo
andyma_gw

make a gasket if need be. Gasket paper is available at most hardware stores. I use Permatex gasket sealer #2B. It is non-hardening. It is old school stuff. Apply it, let it skin over for about 20 minutes and assemble.

    Bookmark   July 27, 2009 at 5:33PM
Thank you for reporting this comment. Undo
Windedspirit64_yahoo_com

I have an old Remington saw model number SL-9. How can I find out what year it was made?Serial number pm9937.

    Bookmark   February 3, 2011 at 11:27AM
Thank you for reporting this comment. Undo
loger_gw

Have you all tried "Chain Saw Collectors' Corner" at the address below for info? Plus, post pics or links, I would like to see the "Monsters". A Remington gas saw vs electric is new to me. I serviced a few old Homelites in the mid 70s that were giants and old. The newer small saws were all the average owner had around here. Loger

http://www.acresinternet.com/cscc.nsf/6359233ddce7cc3d88256bcb0059e03e/7321b2ba6e8981ef88256bcb005a1d1a?OpenDocument

    Bookmark   February 3, 2011 at 1:42PM
Sign Up to comment
More Discussions
Kohler K181 valve clearance
The engine would run perfect for maybe 30-45 minutes,...
snuffyinatl
Sears air compressor engine won't run when plugged in
Sears Paint Sprayer/Air Compressor Model No. 106.153542...
Cletus77
Primer not getting Gas?? After Carb Rebuid?
I just rebuilt a couple snow blower Carbs (both Tecumseh...
bertman_gw
Electrolytic Rust Removal
Has anyone tried this, using a battery charger, "washing...
exmar
honda snowblower problem
i have a honda 928 snowblower... good machine, but...
rudall
© 2015 Houzz Inc. Houzz® The new way to design your home™