B&D Edge Hog LE750

rjr1(z5ma)July 15, 2011

I have an "Old" version of the above mentioned, the one that had a black handle but a GREEN body. The replacement blade is what I am after, the blade with an oblong center hole, not the round hole with the two washers at each end. The problem is the replacement blade part # is EB-007, but the only one I can find with this number is not the correct blade..it has a round center hole.. do any of you know whom might have the correct blade?

Thank you for reporting this comment. Undo
tomplum

The green ones were older, but the folks at B&D have always been helpful. They will need the model and type #. I would assume that they still sell the double d blade, though maybe not.

Here is a link that might be useful: bnd

    Bookmark   July 15, 2011 at 10:43PM
Thank you for reporting this comment. Undo
rjr1(z5ma)

I tried the B&D site and do not think they stock the blade I am looking for. Anyone know what other store/site might have the correct blade?

    Bookmark   July 16, 2011 at 2:36PM
Sign Up to comment
More Discussions
Any Good Electric Brushcutter?
I have a small area, my lot is just 1/2ac and less...
InFlux
Primer not getting Gas?? After Carb Rebuid?
I just rebuilt a couple snow blower Carbs (both Tecumseh...
bertman_gw
Testing the new format X allowing multiple attachments.
I am back to two Lexan chain guides due to a chain...
loger_gw
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Toro 826 Drive Belt Jumps Off Crankshaft Pulley
Hello, I have a nine year old Toro Powermax 826. Late...
ronpr2112
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™