Troybuilt Horse PTO log splitter

griff_2009July 20, 2009

I have a Troybuilt Horse model# 12090 that I bought from Garden Way 8/4/1999. Does anyone know where I might find a log splitter that hooks up to the PTO and how well do they work?

Thank you for reporting this comment. Undo

They work very well just like the original Troy-Bilt tillers. My father has decided to sell his 12 ton PTO log splitter that he used on his Troy-Bilt Horse tiller. Let me know if you have found one and/or if you found a good site that I could list it on.

    Bookmark   August 7, 2009 at 12:41AM
Thank you for reporting this comment. Undo

How much does he want for it and what state are you in?

    Bookmark   August 8, 2009 at 2:09AM
Thank you for reporting this comment. Undo

We are in Denver, CO. I have not yet pinned him down on a price. Where are you located?

    Bookmark   August 9, 2009 at 8:44PM
Thank you for reporting this comment. Undo

Too far away. PA

    Bookmark   August 9, 2009 at 9:03PM
Thank you for reporting this comment. Undo

I live in Utah. Does your father still have the Troy Bilt PTO log splitter. If so, contact me, I'd like to purchase and pick up. A road trip sounds fun-Thanks

    Bookmark   May 19, 2010 at 3:18PM
Thank you for reporting this comment. Undo

I have a pto log splitter for horse for sale 700.00 works perfect. New tiires

    Bookmark   September 17, 2014 at 9:19PM
Thank you for reporting this comment. Undo

Is this item still available and do you have any additional information such as item or part number? Do you know how old it is?

    Bookmark   December 16, 2014 at 7:22PM
Thank you for reporting this comment. Undo
ray_and_laura(North Calif.)

Griff 2009,

Back in 1999 I bought a PTO Horse with a tiller, chipper shredder, generator and log splitter, all for $675. I immediately noticed that the PTO engagement dogs did not stay meshed properly.

That problem was fixed by installing backcut dogs provided by Garden Way as warranty items. Unfortunately, that backcut dog does not fit the log splitter because the splitter pump shaft is smaller than ID of the backcut dogs that fit all the other atachments.

If you have a machine shop that can broach a keyway, the updated dog can be used if you use a sleeve to increase the pump shaft diameter.

These are light duty splitters. Because they are horizontal, it's necessary to lift the rounds onto the splitting beam. I like mine but lifting the big rounds is very inconvenient.


    Bookmark   December 16, 2014 at 10:28PM
Sign Up to comment
More Discussions
Snowblowers and engine choices - Ariens vs Toro vs Simplicity and
I live on the shoreline in CT, where we get anywhere...
Craftsman Snow Blower - Drive problem
During our big storm last week i noticed I started...
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
Troy Bilt Horse Drive Shaft Bearings
I took my horse apart because the front transmission...
Dewalt 3800 pressure washer, open hole between pump and engine.
Hi, I just bought a dewalt 3800 pressure washer gx...
© 2015 Houzz Inc. Houzz® The new way to design your home™