Troy-Bilt, model 47330, chipper/shredder.

jerry2338July 3, 2009

I have a Troy-Bilt, model 47330, chipper/shredder. It's the upright, model that discharges straight down, 10HP.

The 3/4" screen has broken multiple times and rewelded.

I do not think I can have it welded again.

I am trying to find a new screen, but am not having any success. Any one know where I can get one?

Thanks Jerry.

Thank you for reporting this comment. Undo
Steven Laurin & Company

I have a similar Troy-Bilt Super Tomahawk down-discharge chipper/shredder - 8 hp, 1991 model. My 3/4" screen is in good condition but I've been searching for the bar grate - used for shredding wet, heavy material. There's an ebay seller listing grates for the side discharge models - but can't locate any for the bottom discharge. If you or anyone else find leads - I'd be interested.

Following are screenshots of the 3/4" screen from an owner's manual.

    Bookmark   July 6, 2009 at 10:10AM
Thank you for reporting this comment. Undo

A flurry of screens just went through recently on ebay. Most were for the newer forward discharge design (I bought a 1.75" one) but there were a few for the straight down ones.

One thing you can do is search with different key words and some of the hits you get will be ebay stores. That is where you will find most of the older design ones and for the Junior Tomahawk.

    Bookmark   August 17, 2009 at 12:01AM
Thank you for reporting this comment. Undo

If you still need discharge screens, contact me. I have 3 new 10" screens: There is a bar grate, a screen with 1-3/4" holes and one with 3/8" holes.

    Bookmark   April 24, 2010 at 10:09AM
Sign Up to comment
More Discussions
Snowblowers and engine choices - Ariens vs Toro vs Simplicity and
I live on the shoreline in CT, where we get anywhere...
IS it ME ? OR is this site/Forum Gone in hibernation?
This used to be such an informative and active site!!...
Best gas leaf blower?
Can anyone recommend a good gas powered leaf blower?...
Toro 826 Drive Belt Jumps Off Crankshaft Pulley
Hello, I have a nine year old Toro Powermax 826. Late...
2 stroke Mantis tiller vs. 4 stroke Mantis
I'm looking at buying a small Mantis cultivator but...
© 2015 Houzz Inc. Houzz® The new way to design your home™