Green Machine parts

tekts(Colorado USA)August 30, 2007

Have several Green Machine trimmers (HMC) Need piston rings for the 3000LP (25.4 CC). Angle gearcase for the M40. Anyone know of a source GM parts? I have the part #s if needed. Thanks, KD.

Thank you for reporting this comment. Undo
dmullen(Southern CA)

I have a green machine 3000 lp and it is still an excellent trimmer. Parts have been available at the shop I go to. I believe the engine is a Shindawa and they just put a brand new carb on my machine about a month ago. I also got a new gas tank about a year ago and I believe it was a red max or something similar. The tank was identical to my old Green Machine tank. While in the shop last week, I asked about a new shield to go around the trim line. They showed me an identical one off of some other brand. I don't know if they are still available new but might be if they were used on other machines.

    Bookmark   August 30, 2007 at 12:29AM
Thank you for reporting this comment. Undo
ricko99

where can i get parts for my green machine model 3000-lp?
need a gas tank!

thanks
ricko

    Bookmark   December 7, 2008 at 10:47AM
Thank you for reporting this comment. Undo
canguy(British Columbia)

Green Machine was a very good brand that disappeared many years ago. As has been mentioned, they used Shindaiwa and Red Max components so some parts can be matched up.

    Bookmark   December 7, 2008 at 1:41PM
Thank you for reporting this comment. Undo
dmullen(Southern CA)

I did a search on RedMax and there are several parts sources shown on the net. If you cannot find one, post again and I will call my local shop or give you their phone number. They might still have one in inventory.

One other thought. When my gas tank cracked and one shop told me that there were no parts available, I considered plastic welding it. Harbor Freight has a cheap plastic welder (about $30) that I was going to try. Don't know if it would have worked but would be worth a try since these are such good machines.

    Bookmark   December 7, 2008 at 2:50PM
Thank you for reporting this comment. Undo
rcmoser

ryobi 4 strokes plastic gas tanks have the same problem where they are glued togather it splits right under the filler cap neck. I jus epoxy both of mine. One was 3 years ago and the other was last year, so far the epoxy repair hasn't leaked.

    Bookmark   December 7, 2008 at 8:23PM
Thank you for reporting this comment. Undo
tparr

HMC Green Machine has an optional cultivator and I am looking for the "wig-wag" cultivator blades that don't seem to be available any more. The machine runs fine. Can anyone assist?

    Bookmark   June 20, 2010 at 4:35PM
Thank you for reporting this comment. Undo
fish40037

You can buy Shindaiwa t25 parts andmake them work....

    Bookmark   June 20, 2010 at 9:32PM
Thank you for reporting this comment. Undo
mr_mike34_hotmail_com

2500LP green machine gas fuel tank.. i need one anybody no where to get one

    Bookmark   March 29, 2011 at 6:43PM
Thank you for reporting this comment. Undo
dmullen(Southern CA)

Look at a "Red Max" dealer. I was told that they bought the designs for the Green Machine.

I also needed a gas tank and they provided one that was exactly like the one on my Green Machine 3000.

    Bookmark   March 29, 2011 at 8:36PM
Thank you for reporting this comment. Undo
loger_gw

I needed a Green Machine's Carb Kit. My tech said it had to be one of two Walbro Kits he pulled and matched. It has performed good for me over 10 years. I feel it performed good at least 15 years on a commercial level before it was given to me. It was the split shaft trimmer with the hard blade and string trimmer. I adapter a longer hard blade shaft to the powerful motor and it's a back saver, loger

    Bookmark   March 29, 2011 at 10:01PM
Thank you for reporting this comment. Undo
rice89_hughes_net

I need a muffler for my 3000ss could anyone help me.

    Bookmark   May 5, 2011 at 12:27AM
Thank you for reporting this comment. Undo
carl_proulx_hotmail_com

I am looking for a gas tank fr my green machine 3000 lp.
Where can I get ne

    Bookmark   July 10, 2011 at 1:33PM
Thank you for reporting this comment. Undo
earthworm(6 Pennsylvania)

Epoxy the gas tank and substitute some other exhaust...find something in your local yard.

    Bookmark   July 10, 2011 at 7:07PM
Sign Up to comment
More Discussions
Reciprocating Saw
I am looking to buy a reciprocating saw. I am not looking...
pirate94
McCullough Pro Mac 700 has to be a professional grade saw vs a Home?
Servicing/Starting my Neighbor’s McCullough Pro Mac...
loger_gw
Looking for a new "top box" for my tool chest.
My old one died of old, old age and I didn't replace...
exmar
Woodzig electric pruner
I have a Woodzig electric pruner and use it often....
ranger_ric
Any owners of the Troy-bilt Cultivator Plus?
I bought this around 1984 and have never seen another...
baymee
© 2015 Houzz Inc. Houzz® The new way to design your home™