wood chipper blades

kdooz(4)August 2, 2013

Does anyone know if there are any improved blades for wood chippers? I have an MTD Yard Machines 10hp chipper/shredder. I have a lot of white spruce branches that I am chipping. They are pretty tough and stringy. It seems to me that if the blades had some teeth on them they would work better. I have searched for blades and all I can come up with are the stock blades. Any help would be appreciated. Thanks

Thank you for reporting this comment. Undo
Kb2112

Ive just taken mine out and sharpened them with my bench grinder. My chipper has gone through junipers, pine, oak, maple, etc.., and they just keep going with periodic sharpening. They sometimes produce strings instead of chips too.

    Bookmark   August 5, 2013 at 7:09PM
Sign Up to comment
More Discussions
Snow Thrower impeller
I have a Craftsman 9 hp dual stage snow thrower, that...
fjs001
Poulan Pro rear tine tiller, burnt valve??
I have a 6.5 Intec Briggs on my tiller, which is 10...
slowpoke_gardener
Older Troy Built Tiller Model ID
Trying to indentify model number of my unit. It is...
gardenerfrank
2-cycle engine troubleshooting
My 2-cycle blower cannot be started. There is a hot...
slim50
Any Good Electric Brushcutter?
I have a small area, my lot is just 1/2ac and less...
InFlux
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™